Gjenstand: EX20060442
|Modell: S-SPOTTER 4000
B-varer Dent puller spot welder med arbeidsbenk - 4000A
Våre B-varer er som regel returvarer fra kunder eller tidligere utstillingsvarer. Produktene kan ha kosmetiske feil, men er teknisk sett feilfrie. Som vanlig gir vi normal returrett og garanti.
kr 9 099,00
kr 11 299,00
Viktige funksjoner
- For pulling dents and bumps from car chassis
- For car repair shops and paint shops
- 3 welding current settings with up to 4000A / Effective dinging hammer with hook
- Easy to swap attachments / Digital, intuitive to operate touch-control panel
- Three welding stages (low/medium/high) / LED-Voltage display
- Automatic and manually adjustable settings / Undercarriage with two shelves
Leveringsdetaljer
Retur og garanti
Nedlastinger
Tekniske detaljer
Spenning [V]
400
Innstilling, sveising
Lav / middels / høy
Nominell inngangsstrøm [A]
42
Detaljer om strømforsyning
400 V, 2 faser / 50 Hz
Jordkabel
1.6 m
Lengde, kabel til sveisepistol
1.75 m
Materialtykkelse, punktsveising
1.6 mm
Mål (LxBxH)
48 x 61 x 94 cm
Vekt
55.1 kg
Leveringsdimensjoner (LxBxH)
60 x 54 x 86.5 cm
Fraktvekt
65 kg
Leveringsomfang
- Dent Puller Spot Welder S-SPOTTER 4000
- Multifunctional gun, incl. 1.75m cable
- Ground cable, 1.6m
- Dinging hammer
- Carbon electrode connection
- 3X carbon electrodes
- Disc attachment
- Attachments for dinging stars
- 10X dinging stars
- 15X washers, 10mm
- 15X washers, 12 mm
- Wrench
- Hook for pulling
- Toolbox
- Instruction manual
- NB støpsel følger ikke med i leveringsomfanget
Produktbeskrivelse
Dent puller spot welder med arbeidsbenk - 4000A
Nobody is happy, when there is a dent in their car! The professional dent puller S-SPOTTER 4000 by MSW remedies this - with 400V. Even more complicated car body damage on the chassis can be easily removed, as the dent puller comes fully equipped with many helpful accessories. It is an indispensable device in any car repair shop or paint shop for straightening out bumps and dents.
The chassis spotter operates mainly via spot welding. Discs or dinging stars are welded precisely onto the tin bulge, in order to straighten out the damaged area with a high-speed dinging hammer. The dent puller S-SPOTTER 4000 has three different settings and a timer. This means that it adjusts to many different needs.
The supplied attachments allow you to weld triangular or round washers, pins, screws and corrugated wire onto the damaged area and straighten the dents out with a dinging claw or a hook.
The precise settings can be adjusted via a rotary knob, quickly and efficiently. In the automatic mode, the welding current goes up to 4000A in a predetermined timeframe. In the manually adjusted mode, the welding current can be set independently from the timeframe. You can choose a welding period between 0.2-2 seconds. The LED-display helps you to always keep the voltage in check.
The dent puller has a welding gun with attachments for carbon electrodes, washers or pins and a dinging hammer. These attachments allow you to straighten out a variety of different bumps and dents. The cable assembly has a length of 1.75m to ensure that you can move around freely. The same applies to the ground cable, which has a length of 1.6m.
The workbench stands on 4 wheels, two of which are freely moveable. The device and its accessories can be placed onto two storage areas. The extensive accessories can be stowed into the case that is included in the delivery.
Om varemerket
Vurderinger og anmeldelser
Vurderinger og anmeldelser
Sorter etter :
Med tillit fra eksperter over hele verden
mer enn 16 års erfaring
innen netthandel
3 MILLIONER
kunder har kjøpt våre produkter